Chun-wei Fan [Thu, 31 Mar 2022 02:36:45 +0000 (10:36 +0800)]
gdkclipboard-win32.c: Fix call to gdk_clipboard_claim_remote()
The call to gdk_win32_clipboard_request_contentformats() can return NULL even
without an error condition being hit (such as when the system clipboard is
empty), so check whether the returned GdkContentFormat pointer is not NULL
before calling gdk_clipboard_claim_remote(), which expects it to be not NULL,
otherwise we face a warning from that funtion and the subsequent
g_object_unref().
As documented:
> Overlay children whose alignments cause them to be positioned
> at an edge get the style classes “.left”, “.right”, “.top”,
> and/or “.bottom” according to their position.
Eli Schwartz [Thu, 10 Mar 2022 05:08:36 +0000 (00:08 -0500)]
meson: use proper handling of wayland-protocols dependency
Ensure that resolution of the subproject occurs via the dependency
interface, not the "poke at subprojects manually" interface, and make
that actually work via --wrap-mode=forcefallback.
There's no need to mark it as not-required and then manually invoke
subproject(), since fallback should work correctly and it is always
needed.
However, if fallback was performed (or forced) it would error out since
get_variable() was instructed to only use pkg-config while the relevant
variable was exported by the subproject as an internal fallback
dependency.
We had code to do it and it never actually got used correctly. This ensures
that the popup services are attached to the parents so that they get proper
stacking orders when displayed. Additionally, it fixes popups from being
shown as their own windows in Exposé.
macos: fix window activation during shadow click-through
If we are clicking through the shadow of a window, we need to take special
care to not raise the old window on mouseUp. This is normally done by the
display server for us, so we need to use the proper API that is public to
handle this (rather than CGSSetWindowTags()). Doing so requires us to
dispatch the event to the NSView and then cancel the activcation from
the mouseDown: event there.
macos: select new key window after processing events
If we closed a key window in response to events, we need to denote another
window as the new key window. This is easiest to do from an idle so that
we don't clobber notification pairs of "did resign"/"did become" key
window.
We have a sorted set of surfaces by display server stacking, so we can
take the first one we come across that is already mapped and re-show it
to become key/main.
If we have server-side decorations we might need to request a layout in
response to the resize notification. We don't need to do this in other
cases because we already handle that in the process of doing the resize
(and that code is that way because of delayed delivery of NSNotification).
macos: fix resize when using server-side decorations
If we are using NSWindow titled windows, we don't end up waking up the
frame clock when the window is resized on the display server. This ensures
that we do that after getting a notification of resize.
There are cases we might want to consume a NSEvent without creating a
GdkEvent or passing it along to the NSApplication for processing. This
creates a new value we can use and check against to propagate that without
having to do out parameters at the slightly odd invalid pointer value for
a GdkEvent (similar to how MMAP_FAILED is done).
macos: do not focus new window when resigning main
This can get in the way of how we track changes while events are actively
processing. Instead, we may want to delay this until the next main loop
idle and then check to see if we have a main window as the NSNotification
may have come in right after this.
macos: clear window stack before requesting motion
We want to ensure that we recalculate the sort order of windows before
processing the motion. Generally this would be done in response from the
display server in GdkMacosWindow, but I've seen it possible to race there.
We need to handle the case where we might be racing against an incoming
configure event due to how notifications are queued from the display
server. Rather than calling configure (and possibly causing other things
to move around) this just queries the display server directly for the
coordinates that we care about.
Additionally, we can display:NO as we are in control of all the display
process now using CALayer.
We failed to handle the toplevel with transient-for case here which could
cause our X/Y calculations to be off in other areas such as best monitor
detection.
We do actually need the parent frame clock here because it is the way we
ensure that we get layout called for our popup surfaces at the same time
as the parent surface.
macos: improve initial placement of toplevels with parent
This doesn't appear to happen much, but if it does it is nice to setup
the window placement initially. Generally, transient-for is set after
the creation of the toplevel rather than here.
macos: use GdkMacosBuffer for storing damage region
The GdkMacosBuffer object already has storage for tracking the damage
region as it is used in GdkMacosCairoContext to manually copy regions from
the front buffer to the back buffer. This makes the GdkMacosGLContext also
use that field so that we can easily drop old damage regions when the
buffer is lost. This happens during resizes, monitor changes, etc.
macos: add clamp helper to keep rectangle in workarea
This helper is useful to ensure we are consistent with how we keep a
window clamped to the workarea of a monitor when placing windows on
screen. (This does not affect snap-to-edges).
If _gdk_macos_surface_move_resize() was called with various -1 parameters
we really want to avoid changing anything even if we think we know what
the value might be. Otherwise, we risk messing up in-flight operations that
we have not yet been notified of yet.
This improves the chances we place windows in an appropriate location as
they don't et screwed up before window-manager placement.
We need to bring the application to the foreground in multiple ways, and
this call to [NSApp activateIgnoringOtherApps:YES] ensures that we become
foreground before the first window is opened. Otherwise we end up starting
applications in the background.
If we are double buffering surfaces with IOSurface then we need to copy
the area that was damaged in the previous frame to the back buffer. This
can be done with IOSurface but we need to hold the read-only lock so that
we don't cause the underlying IOSurface contents to be invalidated.
Additionally, since this is only used in the context of rendering to a
GdkMacosSurface, we know the life-time of the cairo_surface_t and can
simply lock/unlock the IOSurface buffer from begin_frame/end_frame to have
the buffer flushing semantics we want.
To ensure that we don't over damage, we store the damage in begin_frame
(and copy it) and then subtract it from the next frames damage to determine
the smallest amount we need to copy (taking scale factor into account).
We don't care to modify the damage region to swapBuffers because they
already have the right contents and could potentially fall into another
tile anyway and we'd like to avoid damaging that.
This can be used to lock a surface for reading to avoid causing the
surface contents to be invalidated. This is needed when reading back from
a front-buffer to the back-buffer as is needed when using Cairo surfaces
to implement something similar to BufferAge.
Previously, a single CVDisplayLink was used to drive updates for all
surfaces across all monitors. It used a 'best guess' rate which would
allow for updates across monitors of mixed rates. This is undesirable for
situations where you might have a 144hz monitor as it does not allow for
reaching up to that frame rate.
Instead, we want to use a per-monitor CVDisplayLink which will fire at the
rate of the monitor down to the level of updates we require. This commit
does just that.
When a surface crosses onto a new monitor, that monitor is used to drive
the GdkFrameClock.
macos: use video mode for refresh rate and interval
Using the mode allows better detection of refresh rate and refresh
interval for the CVDisplayLink bridge to GdkFrameClock. Using it can help
ensure that our 144hz displays can actually reach that rather than falling
back to just 60hz.
This will also need future commits to rework the displaylink source to be
per-monitor.
When the fingers are placed on the touchpad, we get a scroll event with
the phase NSEventPhaseMayBegin. We can use this to synthesize an is_stop
event. This results in the scrolledwindow stopping scroll with stop
gestures.
This can cause another warning as well, however, which should be addressed
from #4730.
Windows can end up on different monitors despite having a parent or
transient-for ancestor. We want them to be driven by the CVDisplayLink
for the best-monitor, and so this needs to be unshared.
Currently we're using a display link that is for all active displays which
is just the display server trying to find some timings that try to overlap
as many as possible.
That was fine for a prototype, but we really need to do better for
situations with mixed frame rate (such as 60hz and 120hz promotion
displays). Additionally, the 144hz external monitor I have will never
reach 144hz using the current design.
This is just the first step in changing this, but the goal is to have
one of these attached to each GdkMacosMonitor which we can then use to
thaw surfaces specific to that monitor.
macos: move feedback mechanisms into separate file
We will eventually be needing additional feedback from the display server
which would be nice to keep away from the rest of GdkMacosDisplay for
cleanliness sake. Particularly for feedback from mission control and other
environment factors that requires private API for proper integration.
macos: fix origin during live resize of titled window
When using server-side-decorations, we need to avoid potential cycles with
compute-size as it may not have the new sizing information yet. We can
just short circuit during "live resize" to get that effect.
Fixes poor window resizing from top-left on titled windows.
This doesn't give us appropriate results if we use the window delegate.
Instead, we need to adjust the frame at the same time we change the
style mask so that we end up in the same location.
Previously we had issues on macos where the overshoot would keep showing.
To fix this we need to actually use discrete events instead of the
generated deltas from macOS in the scroll wheel case. Additionally, we need
to drop the kinetic momentum events from macOS and rely on the gtk kinetic
events which are already happening anyway. We also need to submit the
is_stop event for the GDK_SCROLL_SMOOTH case when we detect it.
To keep the discrete scroll events correct, we need to alter the hack in
gtkscrolledwindow.c to use the same path as other platforms except for
when a smooth scroll event is in place. In the future, I would imagine that
this falls into the boundary of high-precision scrolling and would share
the same code paths as other platforms.
With all of these in place, kinetic scrolling with overshoot appears the
same on macOS as other platforms.
macos: create new windows with slight origin offset
When creating new windows, it is better if we create them with a slight
offset to where they were created before so that they are visible to the
user separately from what they might be overshadowing.
Carlos Garnacho [Tue, 18 Jan 2022 22:31:09 +0000 (23:31 +0100)]
gtk/imwayland: Use serial to control outbound messages
Following the text-input protocol changes at
https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/115,
use the serial number to have the client push changes to the
zwp_text_input_v3 object only after compositor/client states match.
This specifically is more lenient to compositors pushing multiple
.done events ahead of the client replying to them.
Carlos Garnacho [Wed, 16 Mar 2022 08:55:20 +0000 (09:55 +0100)]
gtkimcontextwayland: Add native surface offset to input coordinates
We were missing the surface offset (e.g. shadows) at the time of expressing
the text caret location in surface coordinates. Add this offset so the
coordinates are as expected by the compositor.
Guido Günther [Tue, 11 Jan 2022 19:21:55 +0000 (20:21 +0100)]
wayland: xdg-activation: Don't assume there's a focus surface
Tools like gtk4-launch can't set surface on the activation token so
don't require it. If the compositor requires it we can't do anything
about it anyway. This avoids a critical:
Carlos Garnacho [Mon, 28 Feb 2022 17:31:40 +0000 (18:31 +0100)]
wayland: Use xdg-activation for non-startup initiated focus requests
Currently, we have all the plumbing in place so that GTK consumes the
startup notification ID when focusing a window through the xdg-activation
protocol.
This however misses the case that a window might be requested to be
focused with no startup ID (i.e. via interaction with the application,
not through GApplication or other application launching logic).
In this case, we let the application create a token that will be
consumed by itself. The serial used is that from the last
interaction, so the compositor will still be able to do focus prevention
logic if it applies.
Since we already do have a last serial at hand, prefer xdg-activation
all the way over the now stale gtk-shell focusing support. The timestamp
argument becomes unused, but that is a weak argument to prefer the
private protocol over the standard one. The gtk-shell protocol support
is so far left for interaction with older Mutter.
Matthias Clasen [Mon, 14 Mar 2022 19:40:12 +0000 (15:40 -0400)]
gtk-builder-tool: Operate without display
The simplify and validate commands can function
without a display connection, only preview absolutely
needs one. Allow this, by using gtk_init_check().
This one can be used for both premultiplied and non-premultiplied alpha
formats, since alpha is always 255. It is useful for opaque PNG upload
on both cairo and GL renderers.
projects / gtk4.git / log